Mul­ti func­tion sewing work­sta­tion — based on flat bed machine (SO: Lace from the top — basic Equip­ment)


The care­ful con­sid­er­a­tion giv­en to the design of this sys­tem of con­struc­tion has result­ed in a machine which can be adapt­ed for the quick changes in mar­ket require­ments in the short­est time. With this mul­ti-func­tion con­cept bet­ter machine util­i­sa­tion, reduced space required for the stor­age of machines, low­er cap­i­tal invest­ment and reduc­tion of spare parts stock are achieved.

New option: Tape joint detec­tion

For recog­ni­tion of the bond­ed joint of 2 tape ends, with a new sen­sor. Alu­mini­um bond­ing tape is not nec­es­sary for detec­tion, the sen­sor also iden­ti­fies paper and plas­tic adhe­sive tape joints. The high scan­ning speed doesn’t affect pro­duc­tiv­i­ty. Opti­mal instal­la­tion of the sen­sor is pos­si­ble due to its com­pact design.

After recog­ni­tion of the joint, the soft­ware cal­cu­lates whether or not a com­plete piece still can be pro­duced. The tape is then trans­port­ed to just after the adhe­sive joint and cut. The waste will be dis­card­ed.


The fol­low­ing con­ver­sion kits are avail­able: SO: Lace from the top; F: Fold­ed elas­tic; SU: Lace from the bot­tom; SUS: Lace from the bot­tom with hem; B: Bind­ing; BV: Bind­ing with front side knife; BG: Bind­ing with elas­tic; BGV: Bind­ing with elas­tic and front knife • Nor­mal stand • HS 234 Stack­er • Strong fab­ric waste suc­tion for San­toni oper­a­tions • HS 800–1 Label dis­penser • QSD Qual­i­ty sewing device • Buzzer when chang­ing ten­sion