For closing side seams on slips and briefs, side and shoulder seams
and sleeves on T-shirts with automatic seam back tacking at seam
start.

• Efficient back tacking of the overlock chain at seam start due to
  the automatic back tacker from the top
  
  

• No additional operation necessary for chain back tacking
  
  
• It is possible to program the length of chain
  
  
• Possibility to switch the automatic back tacker on or off
  
  
• This workstation can be equipped with a 1 needle or 2 needle overlock
  machine
  

Additional solutions for bartacking the thread chains:

HS C1D-EST 40	:	Overlock with back latch device at start
HS C1L-2	:	Overlock with back latch device at start
HS C1L-3	:	Backlatching at start and end with a forward and reverse sewing overlock machine
HS C10B	:	Bartacking of flatseam chains with chain-stitch machine
HS C12M	:	Bartacking of thread chains
HS C12M-101	:	Bartacking of thread chains
HS 101	:	Bartacking of thread chains (conversion kit)

Combined with automatic label attaching:

HS C12N/101

:

- HS 800 Automatic label attaching   with - HS 101 Bartacking of thread chains

Options:

• Fully submerged mounting of the machine
  
  
• Fabric waste suction with waste bag
  
  
• HS 1020-K crank pedestal instead of HS 1001 Z-frame:
  height adjustment by handle for an ergonomic working
  operation
  
  
• HS 800-1 label dispenser, the label is under the garment
  
  
• HS 800-3 label dispenser, the label is on top of the garment
  
  
• Various sewing machine heads