Attaching of rubber or wooven elastic tape to pre-closed leg and waist
openings, for example on slips and briefs or swimwear, with
cylinder-arm overlock machine.

• The cylinder-arm overlock machine allows an optimum and failure-free
  material feed
  
  

• Feeding of elastic tape from the top
  
  
• The metering device rollers, controlled by electronics and driven by stepper
  motor guarantee the required elastic tension for each seam section
  
  
• Efficient working process due to the cutting of elastic tape and the automatic
  re-insertion underneath the presser foot
  
  
• Possibility to equip the workstation with different control units, metering
  devices and cylinder-arm overlock machines
  
  
• Monitoring functions, dependent on the control unit installed on the
  workstation
  
  
• Up-grades of existing workstations are possible
  

The standard workstation is equipped with the cylinder-arm overlock machine
Yamato AZ8403-04DF / K2S and the control unit EST 25A.The control unit
allows to store and concatenate programs with more than one length sections and
tensions.

Options:

• Sewing machine:
  - Juki MO 6904C-xxx-307 / T043
  - Pegasus EX5114-03-333N-2x4 / KS-379
  - other sewing machine head (please specify under
    "request an offer)
  
  
• Control unit:
  - EST 701A: 2 possible tensions, pre-feed adjustable
  - EST 40:     memory for 100 garments, 10 seams per
                     garment, 10 length sections per seam
  
  
• HS 700-3 metering device instead of HS 704
  
  
• HS 750-50 slack feed device up to 50 mm elastic width
  
  
• HS 1020-K crank pedestal instead of HS 1001 Z-frame:
  height adjustment by handle for ergonomic working operation
  
  
• Thread tension release for an optimum chain cutting function
  
  
• Presser foot with chute for a fixed elastic width instead of a
  presser foot with adjustable chute
  
  
• Sewing lamp, mounted on sewing machine head with separate
  plug