HS C9K  2 or 3 needle sleeve hemmer

Hemming of sleeves, breast pockets, front and back parts (optionally) of
T-shirts, poloshirts, undershirts, etc., open/flat operation with 2 or 3 needle
bottom cover stitch machine

• High quality due to the optimum conception of the hemming guide and of
  the modified sewing parts
  

• High productivity is achieved through the continuous tape feeding and
  permanent loading of the automat. When the machine is loaded quickly,
  it sews practically uninterruptedly with the maximum sewing speed
  

• Short training time of the operator because of the automatic sewing
  cycle. The operator only has to pre-position the garment.
  

• Consistent hemming width from the beginning to the end of seam.
  Adjustment to the hemming width and material thickness by knurled
  screws. If required, possibility to remove the hemming guide completely
  from the automat for adjustments, etc.
  

• Top conveyor belt for high quality also on difficult materials
  

• Right hand edge trimming driven by separate motor in front of the
  hemming guide, incl. waste suction for compensation of possibly
  irregularities of cut for a perfect, consistent edge. The number of
  revolutions of knife can be adjusted to suit the different materials
  

• Chain cutting incl. draw device for reliable thread chain linking without
  decreasing the speed
  

• With the modular system the automat can be adapted to the different
  requirements, which arise in practice
  

• A special frame makes possible to adjust the working height of the
  automat accordingly to the requirements of the operator
  

• Ease service due to the movable and therefore free accessible sewing
  machine
  

• Hand switch for manual functions of sewing machine (guillotine,
  sewing etc.) mounted directly on top of the sewing head
  

• HS 230 fast flap-stacker for sleeves
  

• High-tech and efficient electronic control unit
  

 

Options:

• 3 needle instead of 2 needle standard machine
  

• Conversion kit for sewing with top cover thread
  

• Without edge trimming and waste disposal
  

• Laser light line for an exact loading of striped materials
  

• Conversion kit for sewing curly materials
  

• Conversion kit for production of micro fibre fabric
  

• Device for folding sleeves
  

• Thread break monitor
  

• Micro adjustment of edge trimming by a knurled screw
  

• Adjustment of the loading stop by knurled screws
  

• Upgrade to combi-automat for hemming and closing
  sleeves
  

Components for hemming front and back parts:

• Enlargement of table top with additional belts for
  straightforward hemming of front and back parts of
  T-shirts
  

• HS 250-60-80 folding stacker for front and back parts
  and for sleeves (replaces the HS 230 flap-stacker)