|
HS 701-1
Electronic metering device
The vertical arrangement
of the drive rollers allows the direct
mounting
to the presser foot, respectively to the device, resulting in
an immediate
increase of tension
when changing the tension and
in a optimum feeding from the side and metering
of
folded elastic.
Suitable also for
horizontal mounting for laces from the top.
-
Best view for the
operator to the presser foot due to the smallest
possible design and
vertical positioning of the drive rollers on the right
of presser
foot, respectively on the right of the device
-
Best accessibility to
the sewing machine by the optimum swing-out
device
-
High performance of
stepper motor drive of drive rollers for high
sewing speeds and
strong tensions
-
High precision,
reliability and quality of mechanical components and
electronics
-
Suitable to different
machine types
-
Maximum elastic width: 40 mm
-
Different developments
of control units for each application and budget
EST 702/4
With maximum 4 tensions, manual change
EST 703A
Unlimited elastic tension values (1-999) can be programmed
for each
length-section. Possibilities for the programmed automatic
tension
change as follows:
70 garments
8 seams per garment
5 length-sections per garment
In the manual mode 4 different tensions are available
EST 40
High-powered control unit for simple handling with plain
text display.
Unlimited tension values (7-999) can be programmed for each
length-section. Possibilities in the internal memory (MC 40B and
MC 40B-1)
as follows:
100 garments
10 seams per garment
10 length-sections per garment
Additional 100 garments can be programmed on the interchangeable
data medium (only MC 40B).
Options
|